BRICK CUTTER MAT
Our Brick Cutter Mat comes complete with a manual or automatic Pump Box inclusive of a battery, charger and 3m fluted hose for liquid disposal and recycling.
It is designed for paving and tiling contractors to mount their brick cutting equipment in to the mat soa s to contain brick dust generated by cutting activities. This prevents water normally used with this type of equipment for cooling purposes entering into the storm water system.
GUTTER TRAP
Is a standard 6m x 2.5m Portable Vehicle Wash mat cut in half, so one edge does not have a bund and is supplied with a manual or automatic Pump Box inclusive of battery, charger and 3m fluted hose for liquid disposal or recycling. The non bunded edge is placed on the ground facing the direction of the water flow towards a storm water drain and typically taped into place. Waste water from cleaning activities is collected in the mat and the water is pumped off to a garden bed or lawn area. This prevents water water entering the storm water system.
Applications are numerous but could include wash down of car parking areas, wash down of the side of a building or even wash down of a driveway after paving, resurfacing or general cleaning. See picture to the side.
SPILL RESPONSE MAT
Our Spill Response Mat can come with or without Oil Absorbent material to clean up any waste oil or other spill that may be generated from its use.
Applications can be numerous but could include mobile or field service mechanics to capture any oil spills resulting from service activities, vehicle air conditioning or radiator repairers for recovery of coolant, refuse trucks, or any vehicle where the potential for a hydraulic hose failure exists, forklifts, portable bunding for 205 litre dround or portable bunding for any hazardous goods. See pictures to the side.
