SPILL CONTROL MATS
Need to control a spill?
Which Spill Control Mat would best suit your needs?
BRICK CUTTER MAT
Our Brick Cutter Mat comes complete with a manual or automatic pump box, dry cell 12 volt battery and charger for liquid disposal or recycling.
It is designed for paving or tiling contractors, to mount their brick cutting equipment in the mat so as to contain brick dust generated by cutting activities. This prevents water normally used with this type of equipment for cooling purposes entering into the storm water system.
GUTTER TRAP
Is a standard 6m x 2.5m portable wash mat cut in half, so one edge does not have a bund and is supplied with a manual or automatic puump box, dry cell 12 volt battery and charger for liquid disposal or recycling. The non bunded edge is placed on the ground facing the direction of the water flow towards a storm water drain and typically taped in place. Waste water from cleaning activities is collected in the mat and the water is pumped off to a garden bed or lawn area. This prevents waste water entering the storm water system.
Applications are numerous but could include wash down of car parking area, wash down of the side of a building or even wash down of a driveway after paving, resurfacing or general cleaning.
SPILL RESPONSE MAT
Our Spill Response Mat can come with or without Oil Absorbent material to clean up any waste oil or other spill that may be generated from its use.
Applications can be numerous but could include mobile or field service mechanics to capture any oil spills resulting from service activities, vehicle air conditioning or radiator repairers for recovery of coolant, refuse trucks or any vehicle where the potential for a hydraulic hose failure exists, forklifts, portable bunding for 205 litre drums or portable bunding for any hazardous goods.
